How to Mount a TV on Drywall

July 23, 2022 6 min read

how to mount a tv on drywall

If you're looking for tips and tricks for how to mount a TV on drywall, look no further. In this article, we'll discuss the different types of tv mounting plates and discuss the differences between hollow wall anchors and molly bolts. Next, we'll cover how to select a suitable mounting spot. Last but not least, we'll touch on how to hide wires behind a TV.

Hollow wall anchors vs molly bolts

When mounting a TV on drywall, there are two primary choices: molly bolts or hollow wall anchors. Molly bolts are screw fasteners that are often used to mount objects to plaster or drywall without using studs. They are stronger than other types of anchors, but are more difficult to use. Molly bolts usually come with a pointed end that helps in drilling, and a non-pointed end that can be placed into the hole without a point.

Molly bolts have been around for over a century and are very similar to expansion anchors. They are often referred to as "Molly Bolts" but are actually generically known as such. Larger molly bolts are more durable and can hold a heavier load, such as a television or flatscreen. Molly bolts are ideal for mounting heavy objects on drywall, but you should be aware that you may need multiple molly bolts to mount a TV.

Molly bolts are more difficult to install than conventional drywall anchors, but they are an excellent choice for mounting heavy-weight or medium-weight objects. Molly bolts come in two types, the pointed ones are more versatile and can be installed with a few hammer blows. While molly bolts are the best choice for most situations, there are some disadvantages to using them. Make sure you do your homework before you buy an anchor.

While hollow wall anchors are stronger than molly bolts, they are not the best option for mounting a TV on drywall. For those who want to hang heavy objects like frames, smoke alarms, and picture frames, molly bolts are the better choice. But if you want to mount a heavy-duty object, you should consider toggle bolts. The average size of toggle anchors can support up to 50 pounds in drywall and is suitable for all types of drywall.

The biggest disadvantage of molly bolts is the increased risk of ruining drywall. Molly bolts are easier to install, but you must drill the hole with a screw gun or a regular power drill with a screwdriver attachment. This type of anchor will result in a bigger hole. However, molly bolts are better suited for those with a lot of experience in mounting items on drywall.

Choosing a suitable spot for a tv mount

To choose a good location for your television mount, start by taking measurements of the wall. First, choose a central location with easy access to cables, power outlets, and a viewing distance that does not strain the neck. Use a piece of cardboard or paper to measure the distance between the television and the wall. You can then use painter's tape to place it on the wall. Make sure to place the TV at an eye-level level, and use a second helper to check for placement. Once you've chosen the right spot, mark it with masking tape or a pencil.

Then, use a stud finder to locate the studs. You need at least two or three studs for the span of your mount. Mark the studs with painter's tape. If your wall is made of brick, you can use masonry anchors to anchor the mount to the wall. Once you have found the studs, fasten the bracket to the wall using the special anchor bolts that come with the bracket.

Determine the wall material. You need to find out the material of the studs, as well as if you have permission to drill into the wall. If you don't know this information, you may want to hire a professional. In addition, the material of the wall will determine the type of hardware required for the mount. For example, wooden studs require lag bolts, whereas metal studs need toggle bolts, drill toggles, or snap toggles.

Before drilling into the wall, you must prepare the wall by measuring the distance between the studs. Generally, wall trim is nailed to the studs. The nails may be painted or spackled. You can use a magnet to find them and mark the wall higher. If the wall has a power outlet or light switch, you can use an upright straightedge or a vertical level to mark its higher location. Once you have marked the wall, you can use a vertical level or a wall stud finder to locate the nearest studs.

After you have determined the location of the TV mount, you need to choose the right screws to attach the mount to the wall. Ensure that the wall is level and there are 2 holes per stud. Once you've determined where the TV mount is going to go, you can hang the television. Ensure that the mounting bracket is level. If the wall is level, the mount is attached to the wall.

Choosing a mounting plate

Before installing a television on a drywall wall, you should consider how to properly anchor the television. While the TV itself will be strong enough to hold the weight, you need to be sure that the drywall supports the weight of the television. A weak wall may buckle under the weight and break at some point. For this reason, you must consider the strength of your wall before purchasing a mounting plate.

Using a stud finder, you should locate the studs in your wall. These are typically 2 inches wide and 16 inches apart. Some walls have 24 inch studs. Make sure that you drill holes from the center of each stud. This will ensure that the TV will be mounted properly. After this, you should attach extension arms to the mounting plate to allow for the adjustment of the television's angle.

Before buying a mounting plate for your TV, you must know the type of drywall that you're working with. Drywall has studs that span about 40 to 60 cm apart. It's not a good idea to drill into the wall when installing a heavy TV. Be sure to consider other components, such as speakers, before purchasing a mounting plate for your TV.

You should also determine the mounting location. This will depend on the way you watch TV, but ideally, it'll be near an electrical outlet and a stud inside the wall. Make sure that you have placed the mounting template holes over the center of the studs. Once you've chosen a place for the mounting plate, you must select the proper anchors. This may require additional measurements for different wall anchor holes.

Another consideration is the size of the wall. When purchasing a mounting plate, remember to consider the size and weight of the TV. Ideally, it will be mounted at eye level. If you don't have enough wall space, you should choose one that will accommodate the weight of the TV. This will save you from having to move the TV after it's mounted. In addition to the size of the wall, consider how many people will be watching the TV.

Hide wires behind a tv

To hide wires behind a TV when mounting it on drywall, first identify where the holes are located and whether they are drilled through drywall or not. Then, measure the length of the cable, if any, and cut them to fit. For the best results, use recessed cable plates like the Easy Mount Cable Organizer Kit, available at Amazon. Before mounting a TV on drywall, remove the old model. Then, locate a stud-free section near the outlet. Next, cut it with a utility knife. Once the hole is cut, install the cable plates, which will be located behind the TV.

Before mounting the TV, make sure the wires are properly hidden. Use a socket box as a stencil to mark the location of the TV brackets. Cut two holes in the wall, one in each corner. The first hole should be drilled through the drywall, and the second hole should be drilled through the face plate. To hide wires behind the TV when mounting on drywall, use a socket box as a stencil.

If the TV is mounted on drywall, consider installing an over-the-wall TV wire concealer. These are small plastic covers that hide wires beneath a TV mount. They can be secured to the wall using screws or adhesive. They can also be painted to match the wall color. These are excellent solutions to hiding wires and cables behind a TV. But keep in mind that these solutions aren't for every situation.

Another option for hiding wires behind a TV when mounting on drywall is to install an in-wall power extender. You can purchase these from electronics stores or online for about $40-$100 USD. These extenders connect the cable box to the power socket in the wall, making the television look flawlessly mounted. And because of their versatility, they can also serve as an outlet for a wall-mounted plug-in light.

If you are concerned about the visual impact of cords on a wall-mounted TV, you can also install raceways. These are shallow channels that mount directly on the wall, preventing cables from poking through. The raceways can also be cut to fit the desired length, and they can be painted to match the walls. These cable covers come in many different colors and patterns and blend in with the room's decor.