Your Cart is Empty
Before you begin, it's important to determine where you'll mount your new television. There are two basic methods to find a stud: use a wall plate to locate a stud, and then poke a small tool into the gap between the drywall and electrical box. If the TV mount is going to be on a wall, you'll need to find the next stud, and so on.
Before purchasing a TV mounting bracket, determine the size of your television. Most brands use the VESA (Video Electronics Standards Association) mounting pattern. The dimensions of this pattern are usually specified on the television's owner's manual or online. If you're unsure, you can also measure the distance between the TV's mounting holes. Make sure the bracket fits your television's mounting holes. Once you've decided on the size, look for the mounting bracket's maximum weight capacity and check for VESA pattern compatibility.
The height of your television is another consideration when choosing a TV mounting bracket. The higher it is, the better, and the fewer dents and dings you'll notice. If your TV is tall and needs to tilt or rotate, a curved bracket may be the right choice. A low-profile bracket requires room for cables, and it may not fit in tight corners. It may also require a large wall space.
When selecting a TV mounting bracket, be sure to consider the maximum size of your TV. For example, a 75-inch model might not fit your TV. You should also consider how wide your TV is. Make sure that the VESA support is more than half the width of your television. Otherwise, it will hit the wall, preventing it from rotating at a full right angle. Likewise, a 400-by-400-inch TV mounting bracket may not support your TV.
Finally, check the wall type. If your wall is made of drywall, it is important to consider studs when mounting your television. Empty drywall is weak and won't hold much weight, so make sure you've got enough wood studs. If your TV is too light, you can choose a stud-less mount, like the AmazonBasics. It may not be right for your wall type, but it's an option if you're stuck without studs or don't have enough studs.
Installing a TV wall mount requires the stud to be located. A stud is a vertical frame, typically wood or metal, that is evenly spaced within a wall. Typically, walls have sixteen-inch-apart studs, but some have as many as 24 inches. A stud finder is helpful when you don't have a stud-finder or are not sure if your wall has a drywall ceiling.
The first step in using a stud finder to mount tv on wall is to check for any metal piping or brackets. If a stud finder finds an electrical outlet, it might be false, so be careful when you mount heavy objects. To be safe, always find two studs on either side of the heavy item, mark them, and measure their distances. If there are multiple studs, you can drill the center stud, which is approximately sixteen or twenty-four inches away.
Once you have located the stud, you should use a thin tool to feel its side. You can also use a knuckle to find the wall stud. After locating the stud, measure the distance between the stud and the TV mounting area, then proceed to mount the television. The stud found will be approximately sixteen inches from where you intend to mount the television.
If you don't have a stud in your wall, you can still use a toggle mount. Toggle mounts are best for walls with no studs. Hollow wall anchors are strong, but should not be used for full motion mounts, as the arm of the TV could easily pull out of the wall bracket. Also, make sure you use a quarter-inch snaptoggle, because drywall anchors are often not strong enough for full-motion mounts.
Before you begin, it's important to choose a mounting bracket. There are many different types of brackets, and you should choose one based on the type of television you want to mount. Generally, wall mounts don't allow you to adjust the viewing angle, so you'll need to determine the exact position of your television before you begin. However, some wall mounts offer adjustable tilting. This will help you get the perfect viewing angle, so you can sit back and relax in your favorite chair.
If you're going to mount a television, you'll need to know how much space you have on your wall and what size TV you have. You can find this information in the manufacturer's literature, so you'll know how much space you have on your wall. Some brackets are limited to 16 inches of stud spacing, but others can accommodate up to 24 inches. Check the mounting position of your television with the manufacturer's specifications to ensure that it will fit.
You should also consider where to place your cable boxes, gaming consoles, DVD players, and other devices that you want to place near the television. Make sure to mount them on a wall that will hold their weight, and place the bracket so that you can enjoy your favorite TV shows without straining your neck. Make sure you choose a bracket that screws into a stud or a wall stud, as hollow-wall anchors can't support the weight of a TV wall mount bracket.
Before you choose a bracket for your television, make sure you have the necessary materials on hand. You don't need fancy tools, as long as you know what you're doing. You should consider the size of your TV, the height of the screen, and the weight of the device. After you've chosen a mount, hang the television. Remember to check that the TV is level.
Before choosing a wall mount for your television, consider its location. Do you plan to mount your television on a flat surface or on a curved one? In either case, you should consider the distance between the studs, which is approximately 40-60 cm apart. Also, check if your wall mount has the ability to telescope out to access the back of your television, which is important if you plan on adding more devices to your living space.
Another consideration when choosing a wall mount for your television is the strength of the wall. While flat screens are generally lighter than their tube counterparts, they are still relatively heavy. The mounting device itself will also weigh something, so be sure your wall is strong enough to support it. If you plan to use a stud finder, be sure to check the wall before you begin, as it can be deceiving.
Once you have determined the location of the studs, select the wall mount that matches the studs in your walls. You may also need to select a wall mount with adjustable brackets. Some mounts also come with rotatable features. Make sure the wall mount you buy is compatible with your drywall. Also, check that it has all the hardware needed for installation. Finally, consider the weight of your TV and your needs when choosing a wall mount.
While many TV wall mounts are compatible with drywall, some do not. In addition, all televisions use a common mounting pattern called the VESA pattern. This standard has been created to make it easy to install any wall mount. In addition, most of the TV wall mounts are compatible with drywall. This makes installation a snap. If you need a wall mount with a tilting mechanism, be sure to check the VESA pattern.
While you can do it yourself, you might want to consider hiring a professional TV mounter. This way, you can free up valuable time while saving money, and you'll also get the peace of mind that comes with having the work done properly. A professional will have likely mounted hundreds of televisions, so you won't have to worry about damage or overcharging. Before hiring a professional, you should do your homework online, by looking up their name on Trustpilot and Yelp. Check to see how many other customers have given them good or bad ratings, as this can save you from having to deal with a bad experience.
Before choosing a professional, find out what tools the company has. Do they carry the tools they need for mounting your TV? If not, find a different professional. You also want to make sure that they carry liability insurance, which protects both you and your property. In addition to this, make sure that the professional you hire has a minimum of three years of experience in the field. This will ensure that the mounting job is done properly and is safe for your home.
Using a TV mount will also free up valuable living room space. It will prevent tripping hazards and eliminate any need for you to move around a TV while mounting. The mounting job can be difficult for beginners, but hiring a professional can help you save a lot of time and trouble in the process. In the end, you'll be able to watch your favorite shows without wasting a moment in a DIY project.