If you are thinking about mounting a TV above your fireplace, you will want to make sure that your fireplace actually has adequate heat output before you start mounting a television over it. If you are unsure, you can test the heat output of your fireplace with a temperature gun. Otherwise, you can simply consult your TV manual. If your fireplace doesn't have a heat source, there are still ways to mount a TV over it.
The installation of a TV above a fireplace requires a special type of TV mount, called a full-motion mount. Full-motion mounts can tilt or swivel, allowing for a more comfortable viewing angle. Some mounts also have a leveling mechanism, allowing for easy adjustment. Installation of a full-motion mount above a fireplace requires a little more skill than mounting a television on the wall.
The arms on a full-motion mount should be long enough to extend the television 28 inches from the wall. This will allow it to pivot side to side, as opposed to the short extensions found in most mounts. In addition to this, most full-motion mounts feature a lateral shift feature, which will center the TV on the wall. Ensure that your full-motion mount has this feature so that it looks good and will fit the fireplace's opening.
Full-motion mounts are usually adjustable, with some models being adjustable up to eighteen inches. Whether you're installing a flat-screen or a large-screen TV, you'll want to consider the amount of vertical movement you need. Some mounts are adjustable to 5.7 inches, while others have more than six inches of vertical movement. To ensure the best viewing experience for you and your family, consider a mount that can adjust up to 66 pounds and tilt side to side.
Installing a full-motion mount with vertical movement over a fireplace can be tricky. The heat and air circulation that surround a fireplace can make installation of a mount over a fireplace difficult. It can be a great option for aesthetic reasons and can free up some space in your living room. The hard part is finding a mount that works properly. However, there are several things to consider before you make a purchase.
One important factor to consider before purchasing a TV mount is safety. Mounting your television over a fireplace could become a safety risk for your family. A hole could be opened by accidentally moving the television, causing a gas leak or even smoke to enter the room. This could potentially lead to injury. The best way to avoid this is to invest in a wall mount.
Another thing to consider is height. Most mounts are designed to fit above a fireplace, so it's best to choose a wall-mount model that allows the television to reach the right height. Its height is relatively easy to adjust, and the arms move smoothly. The only downside to this mount is that it does not extend any farther than a 32-inch television.
For larger TVs, full-motion wall-mounts are the best option. The best one is a dual-arm articulated mount. The ECHOGEAR TV wall mount EGLF2 is a great choice. It has five-degree tilt and swivel capabilities, and is 22 inches away from the wall. The mount is also able to adjust up to 15 degrees vertically and 130 degrees horizontally.
If you're considering mounting a television above a fireplace, you'll need to know a few things. First of all, you'll need a drill with a high-impact bit set. And if you're not sure whether the fireplace's chimney is real or fake, you can always install a masonry anchor. If you don't have joists in your fireplace, you can use masonry anchors to hold the mount and TV.
The next step is to prepare your drywall and determine the location of studs. You should have a stud finder to determine where they are located. Once you know this, you can make a cleat or mounting plate that spans the distance between studs. Depending on the size of your television, you may need to make the cleat larger than the studs.
The next step in mounting your TV is to determine the location of the studs in your wall. Joists are common above a fireplace. While plaster walls are relatively durable, you should consider drilling holes for the TV mount. Once you've determined the location of the joists, you can fasten the television mount to the wall. Be sure to use weight-rated anchors.
In addition to providing added visibility to your TV, mounting it above the fireplace will also create more space for your TV. This extra space will be great for your home, especially if you have a limited amount of room. Additionally, you'll be able to place your television out of reach of small children and pets. You can also install screensavers to display pretty pictures or art when the TV is idle.
The fireplace box usually occupies the majority of the space behind the wall above the fireplace. It's easy to locate a stud in this area with the help of a rare-earth magnet. If you're not sure about the studs' location, use a level to determine the slope from left to right. Be sure the top and bottom edges are parallel to the floor.
Another consideration is how to hide the cables. If the fireplace's joists are not constructed properly, the cables will show up when you install the TV. This is an easy, but time-consuming project, so you'll probably want to hire a professional for the job. Also, you'll need to run a cable vertically above the fireplace. But it's worth it in the end!
Before you begin your mounting project, make sure you have access to power and sources for the television. If you're mounting the television above a fireplace, it's important to find a power outlet close to the fireplace. Otherwise, a cable box or power strip might look out of place or look unattractive. Before you mount the TV above the fireplace, determine the angle of the viewing area and whether the fireplace produces too much heat.
Next, run the necessary power and source cables to the TV. If you live in an older home or a pre-wired home, the TV may not be installed yet. If you don't have a television already, you can hire an electrician to run the cables for you. Depending on the size of the TV and the materials used for the walls, the cables may be difficult to run.
Depending on your house's design, you may need to install a TV outlet above the fireplace. If you have low ceilings, you may not have enough space for a TV mounting above the fireplace. Additionally, make sure you have a power outlet where the TV will be installed. Otherwise, you may need to hire an electrician to install the power lines. Also, make sure you have enough space for both the television and fireplace.
If your fireplace is pre-wired, you can easily install your new television. If you do not, you should purchase a separate power adapter to connect the television to your existing television. If you don't do this, you'll end up with an ugly cable trail. A seasoned electrician will be able to help you with this process. A qualified electrician will have all the necessary information to make sure your TV mount will stay in place.
Before you mount the TV, make sure you measure its dimensions and mark the center of the fireplace. If you are mounting a brick fireplace, you can use a power drill to place wiremold in the wall. Make sure to use a masonry drill bit that matches the size of the anchor. Avoid using wooden drill bits if you have a concrete fireplace. The concrete drill bits can cause debris, which can damage your eyes.
If you're mounting a TV above a fireplace, you may want to consider a tilt mount. These have a low profile and can eliminate glare. However, they can be difficult to install, as the TV may be too large to reach behind the mount. A full motion mount, on the other hand, extends from the wall and allows you to access power and sources behind the TV.
In addition to wall mounts, you can use TV wall brackets to secure the television. These brackets can be adjusted so that you can watch the TV from the seating area. For flat mounting, you may want to buy specific equipment that allows the TV to be tilted downward. However, be aware that this may make the TV look bad and may also shorten its life. So, be sure to choose the best wall mount for your home.