Three Simple Ways to Mount Your TV on a Wall Without Wires Showing

July 23, 2022 6 min read

how to mount tv on wall without wires showing

There are several ways to mount your TV on a wall without wires showing. Using a cord cover, raceway, or cable channel system are some of the best ways to conceal the wires and wire bundles. Full-motion mounting brackets are another great option. However, if you want to keep the cords and wire bundles hidden, you can also use adhesive strips. Here are three simple ways to mount your TV without wires showing:

Using a raceway

If you're looking for a way to mount your television on the wall without the wires showing, you should consider using a raceway. A raceway serves as an organizer for all of the cables that run from the TV to the wall. You can mount it on the wall itself or on a skirting board. The key to using a raceway is finding a cable concealment solution that suits your needs.

The most common option for hiding the wires that lead to a television mounted on the wall is to use a raceway. These are basically thin, D-shaped tubes that run along the surface of the wall. They're perfect for hiding wires and cables, and they're easy to install. The raceway is made of drywall-embossed plastic, and back strips screw into the wall or stick to the surface with self-adhesive tape. Once the wires are hidden, a decorative plate snaps over the back piece.

You can purchase a raceway at a hardware store or online. Raceways are usually white, but you can paint them any color you choose to make them blend in with the wall color. You can use acrylic, model, or enamel paint to paint the raceway. If you're not confident with DIY projects, you can also purchase self-adhesive raceways, which are very easy to install and remove.

In addition to the raceway, there are many other options available. Depending on your needs, you can use any type of wall you have. For example, if you want to mount your TV on the wall without wires showing, you can install it in the space behind the fireplace. In both cases, you can hide the wires from view. You can also install a cable box.

While a raceway is an excellent option for hiding cables, it may not be the best option for every situation. A large cathedral-like room might not have enough space to hide the cords, and a rug may be needed to cover them. If this is the case, a wall-mounted raceway might be a better solution. While it might look a little tackier than a traditional wall-mount system, the raceway will help hide any wires that may be snagging the wall.

Using cord covers

If you have a television on a wall, you might be looking for a way to hide the wires. The problem is that most TV wall mounts have a large amount of unsightly wires and cables. In addition to the TV, you may have other electronics that need power, including a cable box, DVD player, or gaming system. Fortunately, there are simple ways to hide wires without tearing up your walls.

Depending on the cable length, you can buy a cord cover kit that will cover the entire length of the wires and hide the ugly cables. These kits can range in price from $10 to $30, and are easy to install. Be sure to buy one that covers the entire length of the cords from the TV to the electrical outlet. Once you have the kit, you can then mount the TV on the wall without having to worry about the wires showing.

Adding cable covers to your TV wall mount is a great way to hide the wires while still giving the system a seamless look. You should consider purchasing cord covers that match the color of your wall to get a more cohesive look. Many home improvement stores sell a small sample size of the same color. You can paint the walls to match the cord covers or leave them the same color as the wall.

You can also cover your television's cords by applying fabric-covered frames to the wall. You can choose a subtle color for your TV mount or use a plain wood frame. Make sure to mark four studs so the adhesive hooks adhere to the wall. Once your TV is mounted, you can use picture hangers or wire hangers to attach the frame to the wall. In this way, the wires won't be visible, and you can use it as decor for the rest of your room.

You can also install a wall cable channel system to mount your television on the wall. If you are lucky enough to have a stud wall, it's easy to hide the wires. If you don't want to cut holes in your wall, you can use trunking or drop the cables through the wall. If you don't want the cables to show, you can also cover the wall with carpet.

Using a cable channel system

Installing a cable channel system on a wall will hide the wires running to your television. This method eliminates the need for drilling holes in the walls. The installation is relatively easy and requires minimal tools. The in-wall socket kit includes most of these tools. You'll also need a keyhole saw and wire cutters. You can cover the exposed wires with carpeting if desired.

A cable duct is a squared-off length of tough PVC plastic that is cut to the correct length. The duct is then installed on the wall directly below the TV mounting bracket. The duct is partially closed when in use. The cable runs through the wall and connects with the existing wiring elsewhere. In addition to being unsightly, this method hides the wires while maintaining a clean look in the room.

The cable channel system provides near-total concealment of cords and wires while offering convenient access to the power outlet. It also helps keep your walls in good shape if you need to make a modification later. The cable channel system is an excellent option for a wall mounting television. You can choose a cable channel system that matches your existing wall color and can hide wires at the same time.

Using a cable channel system to mount television on wall without wires shows is a quick and easy way to hide your TV's wires. Cable covers can be cut to a shape that matches your wall and are generally attached with adhesive tape. The installation is quick, easy, and requires minimal effort. You can also remove the cable covers if you decide not to keep them.

Before mounting a cable channel system on a wall, ensure that the existing electrical wiring is accessible. Standard electrical wiring may cause electrocution and interference. To reduce the risk of electrocution, be sure to turn off breakers before cutting into the wall. Otherwise, you may have to pay a contractor to install a new outlet. So, you may want to consider installing an in-wall power extender if you want to mount your TV on a wall without wires showing.

Using full-motion mounting brackets

The first step to a seamless look is to conceal any cables that may be visible. A full-motion mounting bracket has a concealed arm that helps hide cables from view. You can even install the TV over surface mounted trunking, cut holes, or dropped cables. These brackets do not need to pass through horizontal studs and will not show wires from below. To mount a TV on a wall, you can choose a flat, full-motion mounting bracket.

Another benefit of full-motion mounting brackets is their adjustability. Some models allow you to adjust the screen's angle and position, thereby eliminating glare and improving comfort. In addition, adjustability is an important consideration because the quality of your picture will be best when you watch the TV in a straight line. Therefore, the more adjustable the mount is, the better.

When installing a full-motion mounting bracket, check for studs in the wall. You may want to go for drywall instead of plasterboard. Be sure to check if the wall you are mounting your TV onto is strong enough to support the weight of your TV. If it is, you can consider using a hollow-wall anchor instead. However, you should know that these anchors are not able to support the weight of the bracket.

Before you mount your TV on the wall, you need to measure the wall's studs and mark them with a pencil. Once you've marked the studs, you're ready to install the full-motion mounting brackets. Before you start mounting your TV, make sure the wall is level. You may have to measure it in order to determine how high to place the mounting bracket.

If you're looking to mount your television on the wall without wires showing, a full-motion mounting bracket offers the most flexibility. It has multiple pivot points that allow the TV to move, which is especially useful when you're mounting it in a recessed area. This type of mount also offers a floating effect, making it possible to view it from multiple viewing areas. It also offers an array of options, including cable management, and access to ports.